FAST F-Sil Farba silikonowa do elewacji 10L
FAST F-Sil Farba silikonowa do elewacji 10L
298,00 zł 235,00 zł

FAST Baranek SI thin-layer, siloxane plaster mix, roughcast structurised 15 kg

Availability: duża ilość
Dispatched within: 5 dni
Price: 119,99 zł 119.99
quantity szt.

product unavailable

add to wish list
Rating: 5
Vendor: FAST
Product code: Baranek (siloksan) 15kg


thin-layer, siloxane plaster mix, roughcast structurised

is a high-quality water-based decorative siloxane plaster, intended for making durable applications with the texture of a lamb inside and outside buildings. FAST BARANEK SI is a ready-to-apply plaster on all durable and smooth substrates found in construction, such as cement, lime plaster, cement mortars, concrete, sandstone, etc. and coated with strong paint coatings. The plaster can be applied manually or mechanically.

is a high-quality thin-layer plaster based on acrylic-styrene dispersion with the addition of a siloxane emulsion. Thanks to its special properties, it forms a strongly bound with a base coat, having so-called anti-dew effect. As a result, reduced wettability, reduces the penetration of water with substances dissolved in it, inhibiting its staining and the growth of algae and fungi. Plaster has the so-called effect self-cleaning of the coating and excellent resistance to weather conditions. Supplied in a rich palette of colors according to FAST COLOR SYSTEM. It contains agents eliminating the growth of algae and fungi on the surface of the plaster.

A bucket - 15 kg
Preparation of the surface
The surface should be even, strong and dry, free from all kinds of contaminants that reduce the adhesion of the mortar, i.e. dust, lime, grease, remains of old paint coatings. In order to reduce absorbency, the surface should be primed with one of FAST's grounds. It is recommended to use a primer in the shade of the selected color FAST BARANEK SI
Plaster mass can be applied to following surfaces:
• cement and cement-lime plasters (after a minimum of 28 days from the implementation and humidity not higher than 4%) primed with FAST GRUNT M
• concrete (after more than 3 months from the execution and humidity not higher than 4%) primed with FAST GRUNT M
• gypsum substrates (humidity <1%) primed with FAST GRUNT G and FAST GRUNT M
• layer in the insulation system reinforced with mesh, made on FAST SPECJAL mortar and primed FAST GRUNT M over 3 days
Preparation and use
Before applying the plaster, the contents of each package should be mixed using a low-speed drill in order to equalize the consistency. In the case of too dry mass, it is acceptable to add 100 to 150 ml of water. Apply the plastering mass in a thin layer to the thickness of the grain with a stainless steel trowel. After a short time, depending on the conditions at the time of application, we can invoice it using a plastic trowel. Rub the plaster with circular movements. When applying the plaster, follow the general rule by applying "wet on wet". It is also possible to apply this plaster using the spray method, which significantly reduces the cost and time of application. Details on the exact technology are available at or from technical representatives.
Tools and container should be clean. When applying and drying the plaster, observe the appropriate atmospheric conditions, i.e. the temperature of the substrate and the environment from + 5 ° C to + 25 ° C, lack of strong sunlight, rain and too high relative humidity above 75%. The drying time of the plaster at an optimum temperature of + 20 ° C is from 12 to 48 hours.
Technical data
Base unit: kg
Base: water-based styrene-acrylic dispersion with the addition of siloxane emulsion, mineral fillers and pigments
Open time: about 20 minutes
Drying time: from 12 to 48 hours
Substrate and ambient temperature: from +5 to +25 degrees Celsius
Relative diffusion resistance sd: max 0.3 m
VOC content: below 30 g / l
Water absorption w24: ≥ 0.1 ≤ 0.5 kg / m2
Bulk density: approximately 1.9 kg / dm3
Adhesion to concrete: min. 0.9 MPa
Water vapor permeability: μ [V2]
Storage and comments
Store in original packaging, in dry rooms at temperatures between + 5 ° C and + 25 ° C.
Additional comments:
o Before applying, confirm color compatibility with the order. After the product has been applied, complaints regarding the color will not be considered.
o to avoid differences in shades on one architectural surface, work should be carried out without interruption, using plaster packages, previously mixed with each other in a large castrm.
o Protect the plaster against unfavorable atmospheric phenomena by means of scaffoldings until they are completely dry.

The recommended product or the method of implementation does not  exempt the contractor from carrying out work in accordance with the construction works and health and safety rules.
P.W. FAST guarantees and bears responsibility for the quality of the product, while it does not affect the way it is used and the conditions in which it was used. All technical data were measured under normal conditions, i.e. temperature + 200C and 60% relative humidity. In case of other conditions than the above, the drying time may change, i.e. lengthen or shorten.
During work, avoid direct contact with the skin and protect the eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Immediately wash contaminated skin with plenty of water. Keep away from children.
The product conforms to the European Technical Approval: ETA-14/0464. Has the ETA certificate of conformity: 1020-CPR-020-032349. Has a valid hygienic certificate. It is the component of the ETICS FAST S thermal insulation system.


Product reviews (0)

Shop is in view mode
View full version of the site
Sklep internetowy