FAST GRUNT F Acrylic priming interior paint 4l

Availability: duża ilość
Dispatched within: 5 dni
Price: 49,00 zł 49.00
quantity szt.

product unavailable

add to wish list
Rating: 5
Vendor: FAST
Product code: GRUNT F 4l

Description

Acrylic priming paint for interiors
 
________________________________________
 
Application
FAST GRUNT F is an acrylic primer for the application on cement, cement-lime, gypsum, gypsum and cardboard surfaces as well as fiberglass wallpapers indoors. It is suitable as a primer for dark, intense colors of paints and for painting dark surfaces over light ones.

Properties
FAST GRUNT F is an ecological primer paint leveling the absorbency of the surface and improving the adhesion of subsequent paint coatings. It has an excellent covering and filling properties, increasing the performance of topcoats. It has a mild aroma and high efficiency. It can be colored in pastel colors according to the FAST color palette

Packaging
bucket - 4 l
bucket - 10 l
 
________________________________________
 
Preparation of the surface
The surface needs to be clean, dry, free from grease and dust. Scratches and defects need to be repaired and completed. The paint should be applied on strong, compact surfaces. Surfaces to be painted should be precisely dusted, and then washed with water. Walls painted with chalk surfaces should be washed off and primed with deep penetrating concentrate FAST GRUNT G.
The paint can be used on following surfaces:
• cement and cement-lime plasters (after a minimum of 28 days from the appliction and humidity not higher than 4%)
• concrete (after more than 28 days from the application and humidity not higher than 4%)
• gypsum surfaces (after more than 14 days and humidity below 1%)
________________________________________
 
Preparation and use
Before using, the paint should be mixed precisesly. FAST GRUNT F can be applied by roller, brush or spray. It is allowed to dilute the paint with water up to a maximum of 10%. The drying time of paint in regular conditions is about 2 hours. Painting with topcoat can be started after about 4-6 hours. The ambient temperature during the works as well as during drying should be + 5 ° C up to + 25 ° C.
 
________________________________________
 
Technical data
Base unit: liter
Base: synthetic dispersion with addition of fillers and pigments
Drying time: up to 2 hours
VOC content: below 30 g / l
Bulk density: about 1.4 kg / dm3
 
________________________________________
Storage and comments
Store in tightly closed containers at temperatures + 5 ° C up to + 25 ° C. Protect against freezing and overheating.
The recommended scope of use of the product or the method of application does not relieve the contractor from carrying out work in accordance with the construction work and health and safety rules.
P.W. FAST guarantees and bears responsibility for the quality of the product, while it does not affect the way it is used and the conditions in which it was used. All technical data were measured under normal conditions, i.e.  + 20 ° C up to 60% relative humidity. In case of other conditions than the above, the drying time may change, i.e. lengthen or shorten.
This card replaces all previous versions.
During work, avoid direct contact with the skin and protect the eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Immediately wash contaminated skin with plenty of water. Keep away from children.
Manufactured in accordance with PN-C-81914: 2002 and PN-EN 13300: 2002. It has a valid hygienic certificate.

 

Product reviews (0)

up
Shop is in view mode
View full version of the site
Sklep internetowy Shoper.pl